Intel OpenCL Quick Start Guide

• common: Includes helper and utility functions to interface with the FPGA

• vector_add: Includes the actual application code

Other available examples to try are:

asian_option
channelizer
compression
compute_score
double_buffering
fd3d
fft1d
fft1d_offchip
fft2d
hello_world
jpeg_decoder
library_example1
library_example2
library_hls_sot
library_matrix_mult
local_memory_cache
loopback_hostpipe
mandelbrot
matrix_mult
multithread_vector_operation
n_way_buffering
optical_flow
sobel_filter
tdfir
vector_add                      <--- used in this guide
video_downscaling
web

With module reset, previously loaded modules are cleaned up. The first module loaded, fpga, is a gateway module to the actual modules loaded in lines 3-4. Without version number provided, the latest versions will be loaded. To use a specific version, you can append the version, e.g. intel/opencl_sdk/21.4.0. All available versions can be queried with module avail intel/opencl_sdk With the given commands the following modules are loaded

• intel/opencl_sdk: Loads the compilation infrastructure for Intel OpenCL FPGA code

• bittware/520n: Loads the drivers and board support package (BSP) for the Intel Stratix 10 card

Together, these modules setup paths and environment variables, some of which are used in the examples Makefile to specify the Stratix 10 as target card. Observe for example:

echo $FPGA_BOARD_NAME
p520_hpc_sg280l

echo $AOCL_BOARD_PACKAGE_ROOT
/opt/software/FPGA/IntelFPGA/opencl_sdk/20.4.0/hld/board/bittware_pcie/s10_hpc_default

If you have a project that was only validated with an older BSP, you can explicitly load the module for an older version of xrt, e.g. bittware_520n/19.4.0_hpc.

The table below shows the full mapping of valid SDK to BSP versions for the Intel OpenCL design flow. Make sure to match the allocated constraint for real hardware execution.

Behind the scenes the Makefile triggers the following command, putting together the correct OpenCL headers and libraries, to produce an executable bin/host:

g++ -O2 -fstack-protector -D_FORTIFY_SOURCE=2 -Wformat -Wformat-security -fPIE -fPIC -fPIC -I../common/inc -I/opt/software/FPGA/IntelFPGA/opencl_sdk/21.4.0/hld/host/include host/src/main.cpp ../common/src/AOCLUtils /opencl.cpp ../common/src/AOCLUtils/options.cpp -L/opt/software/FPGA/IntelFPGA/opencl_sdk/21.4.0/hld/host/linux64/lib -z noexecstack -Wl,-z,relro,-z,now -Wl,-Bsymbolic -pie -lOpenCL -lrt -lpthread -o bin/host

Further behind the scenes, the Makefile determines some of these compile parameters by invoking the command line tool aocl according to the actutal environment as set up with modules. You can look at these parameters by invoking these commands yourself and use them in your own build process:

aocl compile-config
aocl ldlibs
aocl ldflags

In contrast to the compilation of CPU or GPU code, the compilation (or often called synthesis) of FPGA kernel code will take several hours or even days. Before synthesis and hardware execution, it is highly recommended to check the functionality of your design in emulation. The emulation compiles the FPGA kernel code for an emulator for the CPU (as the same suggests) and can be done within seconds to minutes.

• -march=emulator: Tells the compiler to compile for CPU emulation.

./bin/host -emulator

Initializing OpenCL
Platform: Intel(R) FPGA Emulation Platform for OpenCL(TM)
Using 1 device(s)
  Intel(R) FPGA Emulation Device
Using AOCX: vector_add.aocx
Launching for device 0 (1000000 elements)

Time: 8.075 ms
Kernel time (device 0): 1.071 ms

Verification: PASS

Note, that the FPGA Emulation Device is selected.

Background:

• -rtl: Tells the compiler to stop after report generation.

• -v: Shows more details during the generation

• -board=p520_max_sg280l: Specifies the target FPGA board (Bittware 520N with Intel Stratix 10 GX 2800).

• -board-package=/opt/software/FPGA/IntelFPGA/opencl_sdk/20.4.0/hld/board/bittware_pcie/s10_hpc_default: Specifies the BSP in the correct version. Normally this argument is not required as the compiler uses the environment variable AOCL_BOARD_PACKAGE_ROOT. Only if you you intentionally want to generate a report on an FPGA node allocated with a different constraint, this argument is needed.

• device/vector_add.cl: Kernel file for vector_add written in OpenCL.

• -o vector_add_report: Output directory.

In order to inspect the report, you may want to copy the report to your local file system or mount your working directory, for more information refer to [Noctua2-FileSystems]. For example you can compress the report on Noctua 2:

tar -caf vector_add_report.tar.gz vector_add_report/reports

Then copy and decompress it from your local command line (e.g. Linux, MacOS, or Windows Subsystem for Linux):

rsync -azv -e 'ssh -J <your-username>@fe.noctua2.pc2.uni-paderborn.de' <your-username>@n2login2:/scratch/<DIRECTORY_ASSIGNED_TO_YOUR_PROJECT>/getting_started_with_fpgas/vector_add/vector_add_report.tar.gz .

tar -xzf fpga_compile_report.tar.gz

Open and inspect fpga_compile_report.prj/reports/report.html in your browser. The whole analysis contains little information, since the example is very simple. The main blocks of the report are

• Throughput Analysis -> Loop Analysis: displays information about all loops and their optimization status (is it pipelined? what is the initiation interval (II) of the loop?, …).

• Area Analysis (of System): details about the area utilization with architectural details into the generated hardware.

• Views -> System Viewer: gives an overall overview of your kernels, their connections between each other and to external resources like memory.

• Views -> Kernel Memory Viewer: displays the data movement and synchronization in your code.

• Views -> Schedule Viewer: shows the scheduling of the generated instructions with corresponding latencies.

• Bottleneck Viewer: identifies bottlenecks that reduce the performance of the design (lower maximum clock frequency of the design (F_max), increases the initiation interval (II), …).

Open and inspect vector_add_report/reports/report.html in your browser. The throughput analysis contains little information, since the example is very simple and ND-Range kernels as the one used in this example yield less details in the report than Single Work Item Kernels. The area analysis shows that the kernel system uses at most 1% of the available resources, much more complex or parallel kernels could fit on the FPGA. The system viewer shows two 32-bit Burst-coalesced load and one 32-bit Burst-coalesced store operations. Refer to Intel's documentation (in particular Programming and Best Practice guides) about the Intel FPGA for OpenCL to learn more about the properties and optimization goals in the report.

• With --mem=32G, we allocate a small amount of main memory to this synthesis job, corresponding to the very small example we build here. For larger designs, typically at least 64G will be needed.

• You can check the progress of your job via squeue and after the job completes, check the complete job output in slurm-<jobid>.out.

Under the hood, the aoc command uses the following parameters

• -board=p520_max_sg280l: Specifies the target FPGA board (Bittware 520N with Intel Stratix 10 GX 2800).

• -board-package=/opt/software/FPGA/IntelFPGA/opencl_sdk/20.4.0/hld/board/bittware_pcie/s10_hpc_default: Specifies the BSP in the correct version. Normally this argument is not required as the compiler uses the environment variable AOCL_BOARD_PACKAGE_ROOT.

• device/vector_add.cl: Kernel file for vector_add written in OpenCL.

• -o bin/vector_add.aocx: Synthesized output (configuration for the FPGA).

Expected output

TBD

Note, that the build of the hardware design will create another report similar to the report that we discussed in the previous step. In contrast to the previous report, the new report contains the actual resource utilization of the design.

In order to still use the slurm workload manager, we use a modified batch script copy_pre-synthesed_design_script.sh and submit it.

#!/bin/sh

# copy_pre-synthesed_design_script.sh

# Instead of starting the actual synthesis we use pre-synthezed results.
mv bin/vector_add_fpga.aocx bin/vector_add.aocx

Then, we submit the copy_pre-synthesed_design_script.sh to the slurm workload manager:

sbatch --partition=normal -A <your_project_acronym> -t 00:10:00 ./copy_pre-synthesed_design_script.sh

• We submit into --partition=normal.

• With -t 00:10:00, we allocate a small amount of time to this file copy job.

• You can check the progress of your job via squeue and after the job completes, check the complete job output in slurm-<jobid>.out.

Please notice that the compiled kernel has the same name for emulation and FPGA execution (that is vector_add.aocx). If you override the pre-synthesized design accidentally, you can submit the script again.

Background information:

• -A [YOUR_PROJECT_ACCOUNT]: Specify your project ID to charge compute time.

• --constraint=bittware_520n_20.4.0_hpc: Specifies the correct version of the FPGA drivers (see BSP).

• -N 1 -p fpga: Allocate one Noctua node with FPGAs. Two FPGAs are attached to one Noctua node.

• -t 2:00:00: Allocate the node for 2 hours.

• --pty bash: Get SSH terminal to allocated node.