| Table of Contents |
|---|
Xilinx Alveo U280
...
Relevant with current tools and shells
...
Relevant with current tools and shells
Impossible to allocate different boards from different MPI ranks
When trying to use the two Bittware 520N boards from different MPI ranks, likely an error like the following will occur:
Native API failed. Native API returns: -2 (PI_ERROR_DEVICE_NOT_AVAILABLE) -2 (PI_ERROR_DEVICE_NOT_AVAILABLE)
This is a limitation of the runtime. Details and an experimental workaround can be found at Using Bittware 520N Boards from Different Ranks.
.ERROR: UNRECOGNIZED ERROR CODE (-1001)
This error might occur if the default system gcc (version 4.8) is used, see required gcc versions.
...
LOCALE settings forwarded from your computer
Error message in When an error message like this shows up in you synthesis output (e.g. in your slurm.out files)…
| Code Block |
|---|
Error: Can't run the Timing Analyzer (quartus_sta) -- Fitter (quartus_fit) failed or was not run. Run the Fitter (quartus_fit) successfully before running the Timing Analyzer (create_timing_netlist).
Error: Quartus Prime Timing Analyzer was unsuccessful. 1 error, 0 warnings
Error: Quartus Fitter has failed! Breaking execution...
Error (23035): Tcl error:
Error (23031): Evaluation of Tcl script compile_script.tcl unsuccessful
Error: Quartus Prime Compiler Database Interface was unsuccessful. 3 errors, 0 warnings
For more details, full Quartus compile output can be found in files quartuserr.tmp and quartus_sh_compile.log.
Error: Compiler Error, not able to generate hardware
llvm-foreach:
icpx: error: fpga compiler command failed with exit code 1 (use -v to see invocation)
make: *** [Makefile:160: tidal_fpga] Error 1 |
you should check for details in thequartus_sh_compile.log Either of the following two error messages hints to a problem with LOCALE settings.
Possible Error Details A
| Code Block |
|---|
Internal Error: Sub-system: CFG_INI, File: /quartus/ccl/cfg_ini/cfg_ini_reader.cpp, Line: 1530
Couldn't parse ini setting qspc_nldm_max_step_size=10.0 as a floating point value
Stack Trace:
0xb4fe: err_report_internal_error(char const*, char const*, char const*, int) + 0x1a (ccl_err)
0x17b45: cfg_get_double_value(std::string const&, double) + 0xe4 (ccl_cfg_ini)
0x8f788: CFG_INI_DOUBLE::refresh() + 0x48 (tsm_qspc)
...
Error (23035): Tcl error: couldn't open "top.fit.rpt": no such file or directory
while executing
"open $report"
(procedure "fetch_pseudo_panel" line 3)
invoked from within
"fetch_pseudo_panel $report "Found \[0-9\]* clocks" {1 0} 2"
(procedure "fetch_clock_periods" line 6)
invoked from within
"fetch_clock_periods $report"
(procedure "fetch_clock" line 2)
invoked from within
"fetch_clock "$revision_name.fit.rpt" $clkname"
(procedure "get_fmax_from_report" line 8)
invoked from within
"get_fmax_from_report $k_clk_name 1 $recovery_multicycle $iteration"
(procedure "get_kernel_clks_and_fmax" line 5)
invoked from within
"get_kernel_clks_and_fmax $k_clk_name $k_clk2x_name $recovery_multicycle $iteration"
(file "/cm/shared/opt/intelFPGA_pro/19.4.0/hld/ip/board/bsp/adjust_plls.tcl" line 815)
invoked from within
"source "$sdk_root/ip/board/bsp/adjust_plls.tcl""
(file "scripts/post_flow_pr.tcl" line 59)
Error (23031): Evaluation of Tcl script scripts/post_flow_pr.tcl unsuccessful
...
Error: Quartus Fitter has failed! Breaking execution...
Error (23035): Tcl error:
while executing
"qexec "quartus_cdb -t scripts/post_flow_pr.tcl \"$top_path\"""
invoked from within
"if {$revision_name eq "top"} {
post_message "Compiling top revision..."
# Load OpenCL BSP utility functions
source "$sdk_root/ip/board/bsp/ope..."
(file "compile_script.tcl" line 40)
Error (23031): Evaluation of Tcl script compile_script.tcl unsuccessful
Error: Quartus Prime Compiler Database Interface was unsuccessful. 3 errors, 0 warnings
Error: Peak virtual memory: 1021 megabytes
Error: Processing ended: Mon Mar 30 14:47:15 2020
Error: Elapsed time: 03:06:43
Error: System process ID: 21428 |
Possible Error Details B
| Code Block |
|---|
Internal Error: Sub-system: SIN, File: /quartus/tsm/sin/sin_simulation_interface.cpp, Line: 1768
near_target_voltage.is_track_half_vccio() || near_target_voltage.is_track_half_signal_swing() || near_target_voltage.is_double()
Processors in use: 16
Stack Trace:
Quartus 0xd4cd4: SIN_SIMULATION_INTERFACE::build_netlist_key(SIN_SIMULATION_SETUP const*, IOO_PIN const*) + 0x334 (tsm_sin)
Quartus 0xd4cd4: SIN_SIMULATION_INTERFACE::build_netlis Quartus 0xd4cd4: SIN_SIMULATION_INTERFACE::build_netlist_k Quartus 0xad9d8: SIN_JSPICE_SIMULATION_CACHE::get_simul Quartus 0xad9d8: SIN_JSPICE_SIMULATION_CACHE::get_simulation_resul Quartus 0x12d1ae: SIN_NADDER_MANAGER_BODY::get_simulatio Quartus 0x12d1ae: SIN_NADDER_MANAGER_BODY::get_simulation_resu Quartus 0xc664f: sin_parallel_run_simulation(SIN_PARALL Quartus 0xc664f: sin_parallel_run_simulation(SIN_PARALLEL_INSTRUCTION*) + 0x3f (tsm_sin)
Quartus 0x4da5: PUT_SPMD_JOB_VOID_PTR_IMPL::thread_loop(bool) + 0x9f (ccl_put)
Quartus 0x4f Quartus 0x42856: msg_thread_wrapper(void* (*)(void*), v Quartus 0x42 Quartus 0x1543e: mem_thread_wrapper(void* (*)(void*), v Quartus 0x15 Quartus 0xcd72: err_thread_wrapper(void* (*)(void*), v Quartus 0xcd72: err_thread_wrapper(void* (*)(void*), void*) + 0x1e (ccl_err Quartus 0x701e: thr_thread_begin + 0x2e (ccl_thr)
System 0x81ca: start_thread + 0xea (pthread)
Error: Can't run the Timing Analyzer (quartus_sta) -- Fitter (quartus_fit) failed or was not run. Run the Fitter (quartus_fit) successfully before running the Timing Analyzer (create_timing_netlist).
Error: Quartus Prime Timing Analyzer was unsuccessful. 1 error, 0 warnings |
Resolution
The root cause is outlined of both errors is the same, but is only evident in the first message of the above export exemplary excerpt fromquartus_sh_compile.log: parsing of a number as floating point failed. This can be is caused by locale settings that are transferred from the computer you connect with to Noctua 2. After connecting to Noctua 2, check your locale settings with locale, and possibly change them with export LC_NUMERIC="en_US.UTF-8".
...