Running Pluto on Login Node
First, make sure that you have set up your ssh-config such that you can ssh onto a specific node of Nocuta 2 (or Noctua 1) directly, i.e. for example via ssh n2login1 or ssh n2cn0164 (see Access for Applications like Visual Studio Code for help) and connect to the chosen login node (referred to as noctuanode below).
Now, start Pluto on this login node
...
To make the link work, we need to set up ssh port-forwarding. Specifically, run the following on your local machine (if you’re on a non-Unix operating system like Windows, you may need to use a tool like, e.g., PuTTY to set up the port forwarding)
| Code Block |
|---|
ssh -L 1234:127.0.0.1:1234 noctuanode-N n2login1 |
Here, the format is <local port>:127.0.0.1:<remote port> and noctuanode n2login1 is the ssh hostname of the Noctua 2 (or Noctua 1) login node that you chose above. If the Pluto-default port 1234 is already occupied on your local machine you may choose something else for <local port>.
After this, you should be able to use the link given by Pluto above in your local browser (if you’ve changed <local port> you need to change the port in the link as well) and should see the Pluto starting webpage.
Running Pluto on Compute Node
In principle, you can do the same as under “Running Pluto on Login Node” above but using, say, n2cn0216, instead of n2login. However, since you won’t always get the same compute node when requesting resources via Slurm this approach is tedious because you need to set up direct ssh access to the given compute node (n2cn0216 in this example) each time.
As a more convenient alternative, you can create a ssh port-forwarding chain as follows
| Code Block |
|---|
ssh -L 1234:127.0.0.1:1234 noctua2 ssh -L 1234:127.0.0.1:1234 -N n2cn0216 |
Here, noctua2 is as specified in Access with SSH and n2cn0216 is the given compute node. Hence, for different Slurm jobs, you only need to change the name of the compute node at the very end of this command (instead of modifying your ssh config).