...
Usage example and sample output for xrt 2.12, after selecting the first card. During this example, the card is idle and configured with the validation bitstream. Total card power in line 17.
| Code Block |
|---|
[tester@n2fpga02 ~]$ ml fpga
[tester@n2fpga02 ~]$ ml xilinx/xrt/2.12
[tester@n2fpga02 ~]$ xbutil examine
...
Devices present
[0000:a1:00.1] : xilinx_u280_xdma_201920_3 user(inst=129)
[0000:81:00.1] : xilinx_u280_xdma_201920_3 user(inst=130)
[0000:01:00.1] : xilinx_u280_xdma_201920_3 user(inst=128)
[tester@n2fpga02 ~]$ xbutil examine -d 0000:a1:00.1 --report electrical
-----------------------------------------------
1/1 [0000:a1:00.1] : xilinx_u280_xdma_201920_3
-----------------------------------------------
Electrical
Max Power : 225 Watts
Power : 33.793573 Watts
Power Warning : false
Power Rails : Voltage Current
12 Volts Auxillary : 12.199 V, 1.363 A
12 Volts PCI Express : 12.192 V, 1.408 A
3.3 Volts PCI Express : 3.286 V
3.3 Volts Auxillary : 3.292 V
Internal FPGA Vcc : 0.851 V, 5.076 A
DDR Vpp Bottom : 2.500 V
DDR Vpp Top : 2.500 V
5.5 Volts System : 5.488 V
Vcc 1.2 Volts Top : 1.212 V
Vcc 1.2 Volts Bottom : 1.204 V
1.8 Volts Top : 1.808 V
0.9 Volts Vcc : 0.901 V
12 Volts SW : 12.235 V
Mgt Vtt : 1.203 V |
...
This tool currently requires special permissions. You can request those via email to pc2-support@uni-paderborn.de.
We recommend to run kernels for at least ~1s to get reasonably accurate results. Further effects of increased power consumption due to thermal effects can be observed after multiple minutes of load on the cards, but are comparably minor.
Usage
...
| Code Block |
|---|
newgrp dialout
/usr/share/nallatech/520n/bist/utilities/nalla_serial_cardmon/bin/nalla_serial_cardmon |
Sample output (during example and sample output. During this example, the card is executing a small sample kernel). Total card power in last row.
| Code Block |
|---|
[tester@fpga-0001 tmp]$ newgrp dialout
[tester@fpga-0001 tmp]$ /usr/share/nallatech/520n/bist/utilities/nalla_serial_cardmon/bin/nalla_serial_cardmon
###################################
520 nalla_serial card monitor utility
version 2.3
###################################
System manager version 0x142
FPGA fabric over temperature limit: 100 degC
FPGA tile over temperature limit: 100 degC
Over temperature: NOT TRIPPED
Voltages
--------
PCIE_12V0 (V) : 11.98
EXT2_12V0 (V) : 12.10
EXT1_12V0 (V) : 12.14
VCC_1V2 (V) : 1.20
VCC_0V9 (V) : 0.86
VID_VOUT (V) : 0.86
VCCR_1V0 (V) : 1.13
VCCT_1V0 (V) : 1.12
VCC_2V5 (V) : 2.50
VCC_1V8 (V) : 1.86
VCC_3V3 (V) : 3.28
VCC_1V8A (V) : 1.79
VCC_ERAM (V) : 0.92
Power up watchdog OK
PSU health : 0x8fff
PCIE_12V0 : UP
EXT1_12V0 : UP
EXT2_12V0 : UP
VCC_0V9 : UP
VCCR_1V0 : UP
VCCT_1V0 : UP
VCC_ERAM : UP
VCC_1V8 : UP
VCC_1V8A : UP
VCC_1V2 : UP
VCC_2V5 : UP
VCC_3V3 : UP
Temperatures
------------
Front PCB (C) : 39.6
Centre PCB (C) : 35.5
Rear PCB (C) : 34.0
FPGA fabric temperature (deg C): 40.44
FPGA tile temperature (deg C): 35.19
Core PH12: controller temperature (C) : 38.4
Core PH12: phase 0 temperature (C) : 39.5
Core PH12: phase 1 temperature (C) : 40.1
Core PH34: controller temperature (C) : 37.7
Core PH34: phase 0 temperature (C) : 40.3
Core PH34: phase 1 temperature (C) : 40.3
Core PH56: controller temperature (C) : 33.1
Core PH56: phase 0 temperature (C) : 34.1
Core PH56: phase 1 temperature (C) : 34.4
VCCR_1V8A: controller temperature (C) : 44.1
VCCR_1V8A: phase 0 temperature (C) : 45.6
VCCR_1V8A: phase 1 temperature (C) : 45.6
1V2_3V3: controller temperature (C) : 42.9
1V2_3V3: phase 0 temperature (C) : 45.9
1V2_3V3: phase 1 temperature (C) : 45.7
Power Measurements
------------------
VCCR iout (A) : 3.19
1V8A iout (A) : 2.64
1V2 iout (A) : 2.02
3V3 iout (A) : 3.88
Core PH12 iout (A) : 8.88
Core PH34 iout (A) : 9.78
Core PH56 iout (A) : 1.94
Total Core iout (A) : 20.60
TI INA219 current monitor, PCIe 12V bus voltage (V) : 12.03
TI INA219 current monitor, PCIe 12V current (A) : 2.28
TI INA219 current monitor, Ext1 12V bus voltage (V) : 12.10
TI INA219 current monitor, Ext1 12V current (A) : 1.98
TI INA219 current monitor, Ext2 12V bus voltage (V) : 12.11
TI INA219 current monitor, Ext2 12V current (A) : 0.32
Total board power (W): 60.25 |
|
...